Kaufman Products, Inc.

Home
Introduction RPS 750 Hand Tools RAP 100 Seal Press RPF 547 Service Vise Steering Gear Boring Tools
Steering Gear Sleaving Tools RAP 500 Sleave Press RPA 300 1000 Testers Boring and Sleaving Service RPA 100 Air Test
Bulk Parts-Seal Kits-Tie Rods-Boots Training Program Sim Tools, Tester Fittings & Parts Contact Kaufman Products
Small Parts Catalog Used Equipment for Sale
ADDITIONAL SERVICES AND IN PLANT TRAINING $6,000.00

  Kaufman Products offers a complete training program to further assist you with the start up of your rack and pinion rebuilding operation. With your input, we will custom tailor a program that will fit your needs and requirements.  Based on your requirements and expectations, this training can last anywhere from one week to four weeks or longer. You can choose if you would like to have the training done on site at your location or at one of our facilities or both. Along with the training Kaufman Products will also furnish you with a comprehensive information packet. In this Packet you will find the following information:

* A list of the vendors you need to contact and open credit with for buying your parts.
* A list of the cores you will need to have on hand for the training.  Any cores you can not get, we will be able to provide you at fair market core price.
* A list of hand tools you will need to rebuild racks.
* A print of a typical shop layout for rebuilding racks.
* Our current rack and pinion catalog and price sheet which can be duplicated. (If you elect to copy our catalog, you will also be linked to the electronic cataloging of Activant and Wrenchhead)

Prior to the start of your actual training program, Kaufman Products can assist you in setting up your facility.  One of our consultants can be sent to your location, to work with you on your plan of operation, shop layout, and set up of equipment.  This will help insure your production will flow smoothly after your training is over.

Kaufman Products prefers to do trainings on site at your facility so we can give you our undivided attention and an uninterrupted training program.  This will also insure that you have everything in house needed to build rack and pinions at your location.  Once your shop is set up and ready to produce rack and pinions, Kaufman Products will work hands on with at most two of your employees teaching them the basis fundamentals of:

* Rack and pinion core identification
* Proper disassembly and tear down procedures
* Proper cleaning techniques (using the equipment you have on site if trained at your facility)
* Boring and sleeving (If you purchased that tooling from us)
* Proper inspection and preparation of parts for assembly
* Proper assembly techniques
* Testing
* Proper packaging procedures

Kaufman Products is very flexible and wants this program to work for both of us.
Therefore the final decision of where your training takes place is your decision.  With Kaufman Products training program you will be buying a turnkey rack and pinion business.


As a follow up to this training you will also have access to our technical support.  If you have questions about building a rack, or a customer with an unusual problem, we are only a phone call away.
 
In closing, to stay abreast of the ever changing rack and pinion market, we also rebuild rack and pinions for local distribution in the Chicago area under the name Precision Remanufacturing, Inc.  Precision is known to have the most complete inventory of rack and pinions in the industry.  We not only catalog the rack, we have it in stock.  To accomplish this, Precision Remanufacturing and Kaufman Products together have sourced out all the parts to rebuild rack and pinions where the parts are not available from our conventional, everyday suppliers.  We in turn make these parts available to you. As our customer, you will be kept informed of new items and parts as soon as they become available as well as new rack and pinion applications added to our catalog.